To Activate The Ddns Client - Zoom 5350 User Manual

Figure 12 shows an example of the menu and Table 8 describes the items you can select.
Figure 12. Example of DDNS Page

To activate the DDNS client:

1
Go to the DynDNS website and create an account for the Dynamic DNS service.
2
You will create a username and password, and be asked to choose a host name for your server,
and the dynamic DNS domain to which your host will be assigned.
3
You will also be asked for your host's current IP address. This is the WAN IP address that has
been assigned to your cable modem/router during provisioning. (See WAN IP Address on the
Basic / Setup web page.)
4
Enter your account information on the Basic / DDNS web page, enable the service by selecting
www.DynDNS.org from the DDNS Service drop-down list, and click Apply.
5
The DDNS client will notify the DDNS service whenever the WAN IP address changes so that
your chosen host name will be resolved properly by inquiring hosts. The current status of the
service is shown at the bottom of the DDNS web page.
37