Chevrolet 2013 Captiva Sport Owner's Manual page 154

Chevrolet Captiva Sport Owner Manual - 2013 - crc 1st edition - 6/25/12
7-4 Infotainment System
Setting the Tone (Bass/
Midrange/Treble)
BASS/MID/TREB (Bass, Midrange,
or Treble): To adjust bass,
midrange, or treble:
1. Press the knob until the tone
control labels display.
2. Continue pressing the
highlight the desired label,
or press the pushbutton under
the desired label.
3. To adjust the highlighted setting,
do one of the following:
Turn the knob clockwise
or counterclockwise.
\
Press the FWD, or
REV button.
If a station's frequency is weak or if
there is static, decrease the treble.
To quickly adjust bass, midrange,
or treble to the middle position,
press the pushbutton under the
BASS, MID, or TREB label for more
than two seconds. A beep sounds
and the level adjusts to the middle
position.
To quickly adjust all speaker and
tone controls to the middle position,
press the knob for more than
two seconds until a beep sounds.
EQ (Equalization): Press to select
knob to
preset equalization settings.
To return to the manual mode, press
the EQ button until Manual displays
or manually adjust the bass,
midrange, or treble by pressing the
knob.
Adjusting the Speakers
(Balance/Fade)
s
BAL/FADE (Balance/Fade): To
adjust the balance or fade:
1. Press the knob until the
speaker control labels display.
2. Continue pressing the
highlight the desired label,
or press the pushbutton under
the desired label.
Black plate (4,1)
3. To adjust the highlighted setting,
do one of the following until the
desired levels are obtained:
Turn the
or counterclockwise.
Press the
REV button.
To quickly adjust balance or fade to
the middle position, press the
pushbutton under the BAL or FADE
label for more than two seconds.
A beep sounds and the level adjusts
to the middle position.
To quickly adjust all speaker and
tone controls to the middle position,
press the knob for more than
two seconds until a beep sounds.
Chime Volume
The radio may be used to adjust the
vehicle's chime level. If the radio
can be used to change the volume
knob to
level of the chime, press and hold
the sixth FAV pushbutton with the
ignition on and the radio power off.
The volume level changes between
knob clockwise
\ s
FWD, or