Chevrolet 2013 Captiva Sport Owner's Manual page 141

Chevrolet Captiva Sport Owner Manual - 2013 - crc 1st edition - 6/25/12
Some entry gates and garage
door openers may require
substitution of Step 2 with the
procedure noted in Gate
Operator and Canadian
Programming later in this
section.
3. Press and hold for five seconds
the newly trained Universal
Remote system button (the
button selected in Step 2) while
observing the indicator light and
garage door activation.
If the indicator light stays on
continuously or the garage
door starts to move when
the Universal Remote
system button is pressed
and released, then the
programming is complete.
There is no need to
continue programming
Steps 4 6.
If the Universal Remote
system indicator light blinks
rapidly for two seconds,
then turns to a constant
light and the garage door
does not move, continue
with programming
Steps 4 6.
It may be helpful to have
another person assist with
the remaining Steps 4 6.
Learn or Smart Button
4. After Steps 1 3 have been
completed, locate the Learn or
Smart button inside the garage
on the garage door opener
receiver (motor-head unit). The
name and color of the button
may vary by manufacturer.
Black plate (43,1)
Instruments and Controls
5. Firmly press and release the
Learn or Smart button. After
pressing this button, you will
have 30 seconds to complete
Step 6.
6. Immediately return to the
vehicle. Firmly press and hold
for two seconds the Universal
Remote system button, selected
in Step 2 to control the garage
door, and then release it. If the
garage door does not move or
the lamp on the garage door
opener receiver (motor-head
unit) does not flash, press and
hold the same button a second
time for two seconds, then
release it. Again, if the door
does not move or the garage
door lamp does not flash, press
and hold the same button a third
time for two seconds, then
release.
The Universal Remote system
should now activate the
garage door.
5-43