Table of Contents
Advertisement
8
GETTING STARTED
EN
Attaching the Shoulder Strap
Follow the illustration.
1
Open the velcro strip.
2
Thread the strap through the eyelet.
3
Fold it back and thread it through the strap
guide and the buckle.
To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
4
Slide the strap guide fully towards the eyelet.
5
Close the velcro strip.
1
2
Eyelet
3
Strap Guide
5
4
Buckle
Attaching the Lens Cap
To protect the lens,
attach the provided lens
cap to the camera as
shown in the illustration.
NOTE:
To confirm the lens cap is
on correctly, make sure the
cap is flush to the camera.
Place here during
recording.
Advertisement
Table of Contents
