Hummer 2004 H2 User Manual page 34

Prev (Previous) Start Point
The Previous start point destination entry method allows
you to select the last start point as a destination.
Once your destination entry is complete, a screen with
the destination preview menu will be displayed. See
"Destination Preview Menu" later in this section for more
information.
Home
The Home destination entry method allows you to
choose home as a destination. Use the joystick to select
Home from the Destination screen. Besides preset
destinations 1 through 5, this is the only preset available
for selection while the vehicle is moving.
Once your destination entry is complete, a screen with
the destination preview menu will be displayed. See
"Destination Preview Menu" later in this section for more
information.
2-24
Map
The Map destination entry method displays the last
location on the map, and the road preference.
Use the joystick to select Map from the Destination
screen, then scroll across the map to locate your
destination. Once you have located the desired
destination, press the joystick to select it. The route will
then be calculated, and you will hear a voice prompt
directing you to "Proceed to the highlighted route." If you
do not hear a voice prompt, your voice guidance
prompts may have been turned off. See "Voice Volume"
earlier in this section for more information.
You may also zoom out to view the entire regional map.
See "Hard Keys" under Using the Navigation System
on page 2-2 for more information. However, if you zoom
out as much as possible and scroll around the map,
some parts of the map will appear to be missing
because they are not readable in larger scales.
Once your destination entry is complete, a screen with
the destination preview menu will be displayed. See
"Destination Preview Menu" following in this section for
more information.