Watching Images On Tv - JVC GZ-MG157U Instructions Manual

Watching Images on TV

Preparation:
•
Make sure that [ANALOG INPUT] is set to [OFF]. (Factory-preset = [OFF]) (
•
Turn off all units.
AV Connector
DC Connector
NOTES
•
You can also connect the cables using the Everio dock connectors. The S-Video cable (optional)
enables even higher quality playback. (
connected to the Everio dock, switch off these devices power.
•
This camera is designed to be used with NTSC-type color television signals. It cannot be used with a
television of a different standard.
1
Turn on the camera and the TV.
2
Set the TV to its VIDEO mode.
3
(Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set the VCR/DVD recorder to its AUX input
mode.
4
Start playback on the camera. (
8 If the aspect ratio of the image is not correct
as shown right
Change the settings in [SELECT TV TYPE].
( pg. 49)
8 To display camera's on-screen display on TV
Set [DISPLAY ON TV] to [ON]. (
AV Cable
AC Adapter
pg. 6) When other devices such as a DVD burner are
pg. 24, 25)
pg. 49)
AV Input Connector
To AC Outlet
16:9 TV
pg. 49)
4:3 TV
29