Denon DCM-370 Operating Instructions Manual page 11

(I) Programming (when using the remote control unit)
.
PROG / DIRECT )
( DISC SELECT 1
Press the PROG/DIRECT button. The m indicator Irghts. Use the
DISC SELECT, number and +I0 buttons to select the disc to be
programmed
For example, to program the 3rd track on the 2nd drsc and the 12 track on
the 5th drsc, press
IPROGIDIRECTJ, -1, 8,
q
, 1-1,
q
,
1+101 and
q
.
(2) Programming (when using the buttons on the main unit)
6
V
J
I 1
( PROG )
I I
l
Press the PROGRAM (PROG) button. The -1 Indicator flashes. Use
the DISC SKIP, Automatrc/Manual search reverse tl44/44),
Automatic/Manual search forward ())/ti) buttons to select the disc to
be programmed.
For example, to program the 3rd track on the 2nd disc and the 12 track on
the 5th disc, press the PROGRAM (PROG) button, DISC SKIP button to
select the 2nd drsc, Automatrc/Manual search reverse fl44/44) or
Automatic/Manual search forward Oh/H) button to select the 3rd track,
then press the PROGRAM (PROG) button.
In the same way. select the 12th track on the 5th drsc using the DISC SKIP
and Automatic/Manual search buttons, then press the PROGRAM (PROG)
button.
(3) To Check the Programmed Tracks (Remote control only)
CALL 1
(4) To Play a Program
(b PLAY)
.AV )
l
Press the Play (, PLAY) button to play the programmed selectrons in the
order in whrch they were programmed.
15) To clear the entire program
l
Pressing the PROG/DIRECT button once more erases the entire program.
Pressing the open/close (A OPEN/CLOSE) button also erases the contents
of a program.
l
Pressrng the PROG/DIRECT button while a program is being played cancels
the program. Play will then be continuous to the end of the disc currently
berng played. after which the player will stop automatically.
Cautions
l
If a program is run durrng playing of a track or from the Pause state, the
track which IS currently being played becomes the 1st track in the program.
l
Direct selection cannot be done while a program is being played. Inputting
the track number of a desired track with the Track Number buttons adds the
input track to the end of the program.
l
When programming, do not program a track number which is not recorded
on the disc. If such a number is programmed by mistake, the player ignore
the program.
@ To Repeat Play of All Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . piGziiG
l
Press the Repeat (REPEAT) button. The (1 indicator will light up.
% Steps 0 and @ can be done in any order, with the same results.
.AV )
l
When the repeat button is pressed once, the m and
q
indicators
Irght. In thus mode, the track currently playrng IS repeated.
l
Press the call button on the wireless remote control unrt.
The contents of the program are displayed in order one item at a time each
time the Call button IS Dressed.
11