Table Of Contents; Contents; Important Safe Guards - Peavey Assisted Listening System User Manual

Wireless assisted listening system

If your system is FCC Class B, the following applies:

Note - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

1) DO NOT attempt to make internal adjustments to the system. Please refer all servicing

to your authorized Peavey Service Center.

2) Turn the unit off if it is exposed to excessive moisture while in operation. Allow unit to dry thoroughly, then

power back up. If unit fails to power up, then refer unit to your authorized Peavey Service Center.

WARNING! Risk of injury or death if used improperly

DURING INSTALLATION AND SET UP

• To reduce the risk of shock DO NOT handle AC/DC adapter with wet hands.

• To reduce the risks of fire or shock from damaged power cord always remove cord from

outlet by grasping the adapter tightly while unplugging.

• To reduce the risk of fire or shock from damaged power cord always turn unit off before

moving it.

• To reduce the risk of fire or shock DO NOT expose this equipment to moisture or dust.

FCC Class B Notice

IMPORTANT SAFEGAURDS

Show Quick Links