La Crosse Technology WS1506 Instruction Manual page 51

The Thermo-hygro Sensor
Rain
Cover
Main Unit
Wall Bracket
use of the supplied screw and ensure that the cables from the wind and rain sensors
are correctly plugged in otherwise data transmission errors could occur.
The Wind Sensor
Wind
vane
Horizontal panel
An ideal mounting place for the thermo-
hygro sensor would be the outer wall
beneath the extension of a roof, as this
will protect the sensor from direct
sunlight and other extreme weather
conditions.
To wall mount, use the 2 screws to affix
the wall bracket to the desired wall, plug
in the thermo-hygro sensor to the
bracket and secure both parts by the
Wind fan
114
Vertical
mast