LCD CONTRAST SETTING
The LCD contrast can be set within 8 levels, from "LCD 1" to "LCD8" (default setting
is LCD 5):
1.
Press the SET key, the contrast level digit will start flashing.
2.
Use the + or MIN/MAX key to adjust the level of contrast.
3.
Confirm with the SET key and enter the MANUAL TIME SETTING.
MANUAL TIME SETTING:
You then may manually set the time of the clock by following the steps below:
Minutes flashing
Hour
flashing
1.
The hour digit will start flashing.
2.
Use the + or MIN/MAX key to set the hour.
3.
Press the SET key to switch to the minutes. The minute digit will start flashing.
4.
Use the + or MIN/MAX key to set the minute.
5.
Confirm the time with the SET key and enter the 12/24 HOUR TIME DISPLAY
SETTING.
Digit flashing
80