JVC GR-FXM75 Instructions Manual page 40

40
EN
System
Select Switch
MENU Button
Select Dial
Display
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE FINE
SNAPSHOT FULL
4
RETURN
4
BACK
REC. TIME OFF
INT. TIME OFF
TALLY LAMP ON
JLIP ID NO 06
DEMO MODE OFF
4
RETURN
INT. TIME
OFF
15S
30S
1 MIN
5 MIN
EXIT
INT. TIME Menu
15S
1S
INT. TIME and REC TIME indications on the normal
screen
Recording Start/Stop
Button
Menu Screen 1
Menu Screen 2
REC TIME
OFF
1 4S
1 2S
1 S
5 S
EXIT
REC TIME Menu
INT. TIME indicator
REC TIME indicator
RECORDING
Self-Timer
You can set the delay between pressing the Recording
Start/Stop button and the actual start of recording. If you
secure the camcorder, you (or whoever is operating the
camcorder) can enter the scene before recording starts.
NOTE:
Before performing the following steps, make sure that:
The System Select Switch is set to "VIDEO" or "D.S.C."
according to your needs.
The Power Switch is set to "PRO.".
The camcorder is in the Record-Standby mode.
1
ACCESS MENU SCREEN
Press MENU.
2
ACCESS "INT. TIME" MENU
Rotate the Select Dial to move the highlight bar to
"NEXT" in Menu Screen 1 and press it to display
Menu Screen 2. Then, move the highlight bar to "INT.
TIME" and press it.
3
SET INTERVAL TIME
Rotate the Select Dial to move the highlight bar to the
desired time, then press it. The Menu Screen
reappears with the highlight bar on "RETURN".
4
CLOSE MENU SCREEN
Press the Select Dial.
5
START DELAYED RECORDING
If you set the System Select Switch to "VIDEO" . . .
.... press the Recording Start/Stop Button. When the
selected time has elapsed, recording begins
automatically.
If you set the System Select Switch to "D.S.C.". . .
.... press SNAPSHOT. When the selected time has
elapsed, a still image is shot automatically.
To Cancel Self-Timer . . .
If you set the System Select Switch to "VIDEO" . . .
.... before the recording begins, press the Recording Start/
Stop Button to display "
TIME" in the Menu Screen to "OFF".
If you set the System Select Switch to "D.S.C." . . .
.... before shooting a still image, press SNAPSHOT, then
set "INT. TIME" in the Menu Screen to "OFF".
Advanced Features (cont.)
", then set "INT.