Advanced Features - JVC GR-FX16 Instructions Manual

ADVANCED FEATURES

Night-Scope
(GR-SXM50/SX26 only)
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
1) Set the Power Switch
pressing down the Lock Button
switch.
q
2) Press NIGHT repeatedly until the desired
mode appears.
A NIGHT AUTO: The shutter speed is
automatically adjusted (maximum 1/2 sec.).
1 NIGHT 20X (only when the Power Switch
is set to " "): The shutter speed is set to 2/5th of
a second to provide 20 times the sensitivity.
2 NIGHT 50X (only when the Power Switch
is set to " "): The shutter speed is set to 1 second
to provide 50 times the sensitivity.
LIGHT (only when the Power Switch
set to " "): The camcorder's light is on and the
shutter speed is automatically adjusted (maximum
1/2 sec.).
• To cancel the effect, press NIGHT
until "OFF" appears.
• During Night-Scope, the following cannot be
activated: "Picture Stabiliser", "Programme AE
With Special Effects", "Digital Effects" and "S.LX"
in SYSTEM MENU (
• Night-Scope does not work when the Video Light
mode is set to "AUTO" or "ON" (
Light").
• During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
@
to " " or " " while
!
located on the
@
q
repeatedly
pg. 20).
pg. 13, "Video
Fade/Wipe Effects
Fade- or wipe-in works at recording start, and fade-
or wipe-out works at recording end.
1) Set the Power Switch
down the Lock Button
2) Press FADE/WIPE
desired mode appears.
3) Press the Recording Start/Stop Button
activate fade-in/out or wipe-in/out.
• Pressing and holding the Recording Start/Stop
0
Button allows you to vary the length for the
image during fade in/out or wipe in/out.
• To cancel a fade or wipe, press FADE/WIPE
@
repeatedly until "OFF" appears.
FADER: Fades in/out to a black screen.
FADER: Fades in/out to a white screen.
@
MOSAIC (Fader): Gradually turns/returns the
picture into/from a mosaic pattern.
is
SHUTTER (Wipe): A black screen moves in
from the top and bottom, closing over the image
like a shutter, or a new image pushes open the
black screen vertically from the centre.
SLIDE (Wipe): A black screen moves in from
the left to gradually cover the image, or a new
image moves in from right to left.
DOOR (Wipe): Wipes in as the two halves of
a black screen open to the left and right, revealing
the scene, or wipes out and the black screen
reappears from left and right to cover the scene.
CORNER (Wipe): Wipes in on a black screen
from the upper right to the lower left corner,
revealing the scene, or wipes out from lower left to
upper right, leaving a black screen.
WINDOW (Wipe): Wipes in on a black screen
from the centre of the screen towards the corners,
revealing the scene, or wipe out from the corners
to the centre, leaving a black screen.
SCROLL (Wipe): Wipes in on a black screen
from the bottom to the top, revealing the scenes, or
wipes out from the top to the bottom, leaving a
black screen.
23
@
to " " while pressing
!
located on the switch.
w
repeatedly until the
0
to
w