4. Accessories
4-1. Installing the label dispenser
1
Label dispenser
2
Screws (set of 2)
【
】
Note1
Remember to switch
off the printer before installing
the label dispenser.
【
】
Note 2
A label liner
thickness of 0.006 mm ± 10%
and a weight of 65 g/m
are recommended.
【
】
Note3
The label dispenser
will take labels up to a max.
width of 110 mm.
1.
Place the printer on a flat
surface and open the
printer cover.
2.
Remove the front cover.
【
】
Note
You can use a coin or
screwdriver to open the cover.
2
± 6%
19
1
2