Features; Playback Features - JVC GR-FX11 Instructions Manual

34
EN
EFFECT Button
P.AE Button
COUNTER R/M
Button
(GR-SXM46/SX41 only)
CLASSIC FILM
Gives recorded scenes a strobe effect.
MONOTONE
Like classic black and white films, your
footage is shot in B/W. Used together with
the WIDE mode (
the "classic film" effect.
SEPIA
Recorded scenes have a brownish tint like
old photos. Combine this with the WIDE
mode for a classic look.
STROBE
Your recording looks like a series of
consecutive snapshots.
VIDEO ECHO
Adds a "ghost" to the subject, giving your
recording a "fantasy" feeling.
Playback Special Effects (GR-SXM46/SX41 only):
playback image.
1) Activate the TBC mode and Auto Tracking.
2) Press and hold P.AE for 1 second repeatedly until the desired mode's name and indication appear. They are
displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The effect is
reserved.
3) To cancel the effect, press P.AE repeatedly until "OFF" appears. "OFF" is displayed for approx. 2 seconds.
Playback Special Effects do not work during shuttle search.
The selected effect mode cannot be changed during still playback.
P.STABILIZER Button
Set to "PLAY".
Rewind (2) Button
Fast-Forward (3) Button
Play/Pause (4/6) Button
Stop (5) Button
pg. 25), it enhances
Tracking:
Eliminates noise bars that appear on-screen
during playback. Factory-preset is Auto Tracking.
To activate Manual Tracking:
1) Press P.AE and EFFECT simultaneously. "MT" appears.
2) Press P.AE or EFFECT as many times as necessary until
the noise bars disappear.
To return to Auto Tracking, press P.AE and EFFECT
simultaneously. "AT" blinks. When Auto Tracking
finishes, the indication disappears.
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and "AT" is
displayed.
Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
TBC (Time Base Corrector):
fluctuating video signals to deliver a stable picture even
with old tapes. Factory-preset: TBC is engaged.
To activate/release the TBC mode, press P.STABILIZER
during playback for more than 1 second. When the TBC
mode is activated, "TBC" is displayed.
The "TBC" indicator turns green (grey with a camcorder
equipped with a black/white viewfinder) while TBC is
working.
TBC does not work during still playback and shuttle
search.
The "TBC" indicator turns white while TBC is not
operative.
It may take a few seconds before TBC actually starts
working.
The picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points or
when normal playback resumes after still playback or
shuttle search.
If the playback picture is distorted when TBC is set to
on, turn off TBC.
Counter Memory Function:
locate a specific tape segment.
1) Press COUNTER R/M and hold for more than 1 second.
The counter resets to "0:00:00".
2) Press COUNTER R/M for less than 1 second. "M"
appears.
3) After recording or playback, press 5, then 2. The tape
automatically stops at or close to 0:00:00.
4) Press 4/6 to start playback.
The counter memory functions in the Fast-Forward and
Rewind modes.
To disable the Counter Memory Function, press COUN-
TER R/M for less than 1 second so that "M" disappears.
Allows you to add creative effects to the
PLAYBACK
Removes jitter from
Makes it easier to

Features