Tape Length Setting - JVC GR-FX11 Instructions Manual

10
EN
Select Wheel
Viewfinder
Display
T E L E M A C R O O F F
L E N G TH T 3 0
T A P E
4
R E TU R N
TAPE LENGTH
T 3 0
T 4 5
T 5 0
T 6 0
E X I T
T E L E M A C R O O F F
T A P E L E N G TH T 4 5
4 R E TU R N
Power Switch
MENU Button
Tape length indicator
T 3 0
Menu Screen
TAPE LENGTH
Setting Menu
GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
1
Set the Power Switch to "PRO.", then press MENU.
2
Rotate the Select Wheel to move the highlight bar to
"TAPE LENGTH", then press it. The TAPE LENGTH
Setting Menu appears.
3
Rotate the Select Wheel to move the highlight bar to
the correct tape length setting. T30=30 minutes of
recording time, T45=45 minutes, T50=50 minutes
and T60=60 minutes.
•To return to the previous setting, rotate the Select
Wheel to move the highlight bar to "EXIT".
4
Press the Select Wheel. The Menu Screen reappears
with the highlight bar on "RETURN". Press the Select
Wheel again to close the Menu Screen.
NOTE:
The tape remaining time (
viewfinder is correct only if the correct tape length has
been selected.
(cont.)
pg. 16) displayed in the