Make Connections - JVC GR-DVX400ED Instructions Manual

74
EN

Make Connections

Also refer to page 24 and 25..
To EDIT**
or JLIP**
Open these
connector covers.
To S-VIDEO
S-Video cable
(optional)
Editing
cable
(provided)
VIDEO IN*
To S-VIDEO
AB
To Remote
PAUSE or
R.A.EDIT
C
To PAUSE IN
DISPLAY
* Connect when an S-Video cable is not used.
** EDIT: GR-DVX709/509
JLIP: GR-DVX400
To AV
Audio/
Video cable
(provided)
White to Red to
AUDIO L IN AUDIO R IN
Yellow to
IN
VCR
TV
USING THE REMOTE CONTROL UNIT (cont.)
1
A A JVC VCR equipped with a Remote PAUSE
connector...
...Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an
R.A.EDIT connector...
...Connect the editing cable to the R.A.EDIT
connector.
C A VCR other than above...
...Connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder.
3
Set the VIDEO/MEMORY Switch to "VIDEO".
(GR-DVX709/509 only)
4
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
5
Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
Refer to the VCR's instructions.
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If
they do, they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/Time
Set "DISPLAY" to "AUTO", "ON" or "OFF".
( pg. 38, 49) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time Code
Set "TIME CODE" to "ON" or "OFF".
( pg. 38, 49)
• Playback Sound Mode, Tape Speed And Tape
Running Displays
Set "ON SCREEN" to "LCD" or "LCD/TV".
( pg. 38, 49)
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be
connected instead of an S-Video cable and audio/
video cable.