Fiat Idea Owner's Handbook Manual page 39

fig. 38
Arranging the driver's seat
in table position
To arrange the driver's seat in table po-
sition, remove the head restraint (see
"Extracting the head restraint" in the
"Head restraint" chapter) and proceed as
shown above.
Heated seats
(where provided)
Press buttons B-fig. 38 to heat the dri-
ver's seat C and to heat the passenger's
seat.
The LED in the button will light up when
heating is on.
38
F0H0046m fig. 39
SLIDING REAR SEAT
Adjusting from inside the
passenger compartment
Lengthwise direction adjustment
fig. 39
Respectively lift the lever A or the lever
B to adjust the required seat portion, then
push the seat back or forwards.
Back rest angle adjustment
fig. 40
Push the lever C move the backrest to
position and then release it.
To prevent irregular operation: press the
lever C as far as it will go.
F0H0047m fig. 40
fig. 41
FIXED REAR SEATS
(where provided)
See the "Expanding the boot" paragraph
for how to fold the seat.
Adjusting from inside the boot
Lengthwise direction adjustment
fig. 41
Operate on handles F and G to adjust the
required seat portion by pushing the seat
forwards or backwards.
F0H0252m
F0H0253m