Replacing Exterior Bulbs - Fiat Idea Owner's Handbook Manual

REPLACING EXTERIOR
BULBS
For the type of bulb and power rating, see
"When needing to change a bulb".
FRONT LIGHT CLUSTER
The front light clusters contain side lights,
dipped beam, main beam and direction in-
dicator bulbs.
To replace side lights, dipped beam, di-
rection indicators and fog light, remove
the lid A-fig. 18 by releasing the retainer
B.
fig. 18
The bulbs are arranged inside the light clu-
ster fig. 19 as follows:
G: Direction indicators
F: main-beam headlights
E: side light
D: fog light
C: Low beams
After replacement, refit the covers cor-
rectly, ensuring that they are locked in pla-
ce.
F0H0179m fig. 19
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ turn the bulb holder anticlockwise A-
fig. 20 and pull it out;
❒ disconnect the electric connector B-
fig. 21;
❒ release the bulb holder clip C-fig. 21;
❒ remove the bulb D-fig. 21 and repla-
ce it;
❒ refit the clip C-fig. 21, connect the
electric connector B and insert the
cap A-fig. 20 turning it anticlockwise.
Arrange the opening vent H-fig. 20 of
the cap from the top downwards.
F0H0180m
147