Menu Button; Demonstration - JVC GR-DVP3 Instructions Manual

8
EN
Automatic Demonstration takes place
when "DEMO MODE" is set to "ON"
(factory-preset).
Available when the Power Switch is set to
" " or " " and no cassette is in the
camcorder.
Performing any operation during the demon-
stration stops the demonstration temporarily. If
no operation is performed for more than 1
minute after that, the demonstration will
resume.
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch to "
pressing down the Lock Button located on
the switch and press MENU. The Menu
Screen appears.
2. Press + or – to select "
press SET/SELECT. The SYSTEM Menu
appears.
3. Press + or – to select "DEMO MODE" and
press SET/SELECT. The Sub Menu appears.
4. Press + or – to select "OFF" and press SET/
SELECT.
5. Press + or – to select " RETURN", and
press SET/SELECT twice. The normal screen
appears.
NOTE:
If you do not slide the lens cover down, you
cannot see the actual changes of the Automatic
Demonstration activated on the LCD monitor or
viewfinder.
AUTOMATIC DEMONSTRATION
" while
SYSTEM" and
SET/SELECT Button
Power Switch
Lock Button
Sub Menu
DEMO MODE – OF F
ON

MENU Button

+, – Button