JVC GR-DVP3 Instructions Manual page 43

CAM CANCEL
RESET
EXECUTE
SOUND MIC
IN
D.SOUND
ON LCD
SCREEN
LCD/TV
DATE/ OFF
TIME
AUTO
ON
TIME OFF
CODE
ON
CLOCK ADJ.
QUALITY
IMAGE SIZE
REC
SELECT
: Factory-preset
NOTES:
The " CAMERA" settings are effective when the Power Switch is set to both "
The " MANUAL" settings are effective only when the Power Switch is set to "
" SYSTEM" and "
applied when the Power Switch is set to "
Switch is set to " ".
The " DISPLAY" settings are effective even when the Power Switch is set to "
The "ON SCREEN" setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) ( pg. 25, 58, 70).
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Enables sound input from camcorder's stereo microphone, when Audio
Dubbing ( pg. 66) is executed. "MIC" appears on the Audio Dubbing
screen.
Enables sound effect input recorded on the provided memory card, when
Audio Dubbing (
Dubbing screen.
Keeps the camcorder's display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder's display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from "OFF" to "
•When playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (
Allows you to set the Picture Quality mode (FINE and STANDARD)
depending on your preference (
Allows you to set the Image Size mode (XGA and VGA) depending on your
preference ( pg. 17).
When Snapshot recording is performed with the VIDEO/MEMORY Switch
set to "VIDEO", still images are recorded only onto the tape.
When Snapshot recording is performed with the VIDEO/MEMORY Switch
/
set to "VIDEO", still images are recorded not only onto the tape but also in
the memory card.
DISPLAY" functions which are set when the Power Switch is set to "
pg. 67) is executed. "D. SOUND" appears on the Audio
pg. 17).
" ( pg. 44). "CLOCK ADJ." only appears when the Power
EN
" or " ".
pg. 13).
" and " ".
".
" are also
".
43