User Maintenance - JVC GR-DVM90 Instructions Manual

78
EN
After Use
1
Turn off the camcorder.
2
Slide down and hold OPEN/EJECT in the
direction of the arrow, then pull the cassette
holder cover open until it locks. The cassette
holder opens automatically. Remove the
cassette.
3
Press "PUSH HERE" to close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4
Open the card cover, then press EJECT. The
MultiMediaCard is disengaged from the
camcorder. Remove the MultiMediaCard.
5
Close the card cover.
6
Slide down BATT. RELEASE
2 3
battery pack
Cassette holder
Remove.
PUSH HERE
2
1
and remove the
.
OPEN/EJECT
Switch
1
BATT. RELEASE
3
Switch

USER MAINTENANCE

Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
2
Open the LCD monitor. Wipe gently with a soft
cloth. Be careful not to damage the monitor.
Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
Pull out the viewfinder fully.
5
Open the viewfinder cleaning hatch in the
direction of the arrow
Insert a lens blower or soft cloth into the gap at
the side of the viewfinder and clean the interior
of the viewfinder with it
6
Close the hatch until it locks in place and push
the viewfinder back in.
NOTES:
Avoid using strong cleaning agents such as benzine
or alcohol.
Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth
refer to the cautions of each product.
Hatch
1
1
.
2
.
Lens blower
2