HP OmniBook 4100 Service Manual page 71

Time-out on AC
Power Button Mode
Resume on Modem Ring
Resume on Time of Day
Resume Time
Auto Suspend on Undock
Boot Menu
Diskette Drive
Hard Drive
CD-ROM Drive
Exit Menu
Save Changes and Exit
Discard Changes and Exit
Get Default Values
Load Previous Values
Save Changes
HP OmniBook 4100
Sets whether power management time-outs occur while the ac
adapter is connected.
Sets the action of the blue power button when pressed for less
than 4 seconds.
Sets whether the system resumes from Suspend if a ring
signal is received.
Sets whether the system resumes from Suspend at a defined
time of day.
Sets the 24-hour time when the system resumes from
Suspend if enabled.
Sets whether the OmniBook suspends after undocking.
Shows the order of boot devices. Move the entries to change
the order.
Saves Setup changes, exits, and reboots.
Discards Setup changes since last save, exits, and reboots.
Does not affect Security and date/time changes.
Restores default settings, stays in Setup. Does not affect
Security and date/time settings.
Discards Setup changes since last save, stays in Setup. Does
not affect Security and date/time changes.
Saves Setup changes, and stays in Setup. Security settings
are saved when changed.
Troubleshooting and Diagnostics
Disabled
Suspend
Enabled
Disabled
When Lid Closed
Default
1. Diskette drive
2. Hard drive
3. CD-ROM drive
3-25