Clarion DXZ665MP Owner's Manual page 23

Operations Common to Each Mode
e
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3IWMA title.
*
The factory default setting is "ON".
2-1.
Select"~
AUTO SCRl".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
-ON:
To scroll automatically.
- OFF:
To scroll just 1 time when the title was
changed or the [T] button was pressed for 1
second or longer.
e
Dimmer control
You can set the dimmer control "ON" or "OFF".
*
The factory default setting is "ON".
2-1. Select
"t
DIMMER".
3-1. Turn the (ROTARY] knob to select "ON" or
"OFF".
To change other settings
1. Press the [ADJ] button to switch to the
adjustment selection display.
2.
Press the
[~~, ~~]
lever upward or
downward to select the "item name".
Each time the
[~~, ~~]
lever is pressed
up/down, the item display changes in the
following order:
"t
BLINK LED"
~
"*
AMP CANCEL"
~ "~
SID DISP"
~ '''~
AUX SENS"
~
"~
SYSTEM"
3. Turn the [ROTARY] knob to select the
"desired setting item".
*
After completing settings, press the [ADJ]
button to return to the previous mode.
e
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
*
The factory default setting is "OFF".
2-1.
Select"~
BLINK LED".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
e
Setting the external amplifier
*
The factory default setting is "OFF".
2-1.
Select"~
AMP CANCEL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
- ON:
Use with connected AMP.
- OFF:
Use with inside AMP.
e
Displaying the Satellite ID No.
*
This function only applies when a Satellite receiver
is connected.
*
The factory default setting is the upper 6 digits.
2-1.
Select"~
SID DISP".
3-1. Turn the [ROTARY] knob to switch between
the display for the upper 6 digits and lower
6 digits.
e
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is "MID".
2-1. Select
"~
AUX SENS".
3-1. Turn the [ROTARY] knob to select "LOW",
"MIDn or "HIGH".
e
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1.
Select"~
SYSTEM
'4
1
;');'3:"".
3-1. Press and hold the
[~II]
button for 1
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the previous
operation mode.
DXZ665MP
23