Sony SCPH-77004 Instruction Manual page 43

Connecting the console
Do not plug the AC power cord for the console into the electrical outlet until
Warning
you have made all other connections.
1
Connect the Ethernet network cable to the NETWORK connector
on the console rear.
Commercially available network cable
2
Insert the connector on the network cable to the network
The connection method will vary depending on the network device.
device.
Refer to the instructions supplied with the network device for details.
Console rear
Do not connect network cables or telephone cords of the following types to
Warning
the network connector; too much electrical current may pass through the
connector, causing a malfunction, excessive heat or fire in the connector:
– Standard residential telephone lines
– Network cables not appropriate for use with a 10Base-T/100Base-TX
network
– Any ISDN (digital) compatible phone or data line
– PBX phone lines
– Other "unknown" types of telephone lines
GB
43
Connecting to a network