For Playback Menu - JVC GR-DVL725 Instructions Manual

48
EN
VIDEO/MEMORY Switch
(Open the LCD monitor to access
this switch.)
Display
V I DEO SOUND MODE
SYSTE M 12B I T
D I SPL AY SYNC RO H
REC MODE
S / AV I
END
BEEP
TAL LY
DEMO MODE
S I DE LED
CAM R SET E
RETUR N
ON SC RE N E – LCD / TV
DATE / T I ME – A U T
T I ME CODE – O F F
RETUR N
* Actual menus differ by model and may appear
differently from these illustrations. Some menu items
may be unavailable on your model.
USING MENUS FOR DETAILED ADJUSTMENT
Power Switch
MENU/BRIGHT Wheel
MODE
Lock Button
Recording Start/Stop
COPY
Button
NPUT
– STEREO
SOUND M D O E
12B I T M D O E – SOUND 1
SYNCH RO
– O . O
REC M ODE – SP
COPY – OF F
S / AV I NPUT – OF F
RETUR N
– MELODY
– O N
– O N
– O N
O

For Playback Menu

The following procedure applies to all except Synchro
Comp ( pg. 62).
1
Set the VIDEO/MEMORY Switch to "VIDEO",
then set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select the
desired function menu, and press it. The selected
function menu appears.
4
Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub Menu.
5
Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6
Rotate the MENU/BRIGHT wheel to select "
RETURN" and press it twice to close the Menu Screen.
Menu Screen Explanations
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(
It is recommended you use
"REC MODE" in the "
VIDEO" Menu when using this
camcorder as a recorder during
dubbing (
COPY ON: Enables dubbing of images
recorded on a tape to a memory
card (
OFF: Enables snapshots to be
taken during tape playback.
S/AV INPUT ON: Enables audio/video signal
(GR-DVL820 input from the AV and S-VIDEO
only) connectors (
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the
AV and S-VIDEO connectors
(
Each setting is linked with "
" SYSTEM", which appears when the Power
Switch is set to "
The parameters are the same as in the
description on pg. 46, 47.
NOTES:
The date indication can also be turned on/off by
pressing DISPLAY on the remote control (provided with
GR-DVL820 only).
"REC MODE" can be set when the Power Switch is set
to "PLAY" or " " (
When "S/AV INPUT" is set to "ON", camcorder playback
cannot be viewed on the AV output.
(cont.)
pg. 49.
pg. 49.
pg. 62.
pg. 13).
pg. 50, 51).
pg. 52).
pg. 50).
pg. 22, 50).
DISPLAY" or
" ( pg. 46, 47).
pg. 13, 45).