Using The Camcorder As A Webcam (Gr-Dvl867/Dvl865 Only) - JVC GR-DVL567 Instructions Manual

Jvc digital video camera instructions
Table of Contents

Advertisement

66
EN
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
USB cable
(provided)
USB-equipped PC
Power Switch
To USB
To USB
connector
Display
W
W
e
e
b CAMERA
b CAMERA
SYSTEM CONNECTIONS
Using The Camcorder As A WebCam
(GR-DVL867/DVL865 only)
This camcorder can be used as a WebCam via USB
connection.
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
3
Set the VIDEO/MEMORY Switch to "MEMORY"
and set the Power Switch to "
then turn on the PC.
• "Web CAMERA" appears on the screen.
• If the PC is not powered on, the camcorder does not
enter the Web Camera mode.
4
When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
Use the provided software PIXELA ImageMixer to
capture video in real-time.
You can also use the camcorder for webconference by
®
using Windows
Microsoft Netmeeting and signing up
for Microsoft Hotmail.
In the Web Camera mode, the following buttons cannot
be operated: E-MAIL, SNAPSHOT, the Recording
Start/Stop button.
Refer to the instruction manuals of the PC and
provided Software.
(cont.)
" or "
",
pg. 9).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents