Make Connections - JVC GR-DVL512 Instructions Manual

62
EN
To EDIT
Audio/Video
cable
(provided)
Editing
cable
(provided)
White to
AUDIO L IN
Yellow to
VIDEO IN*
To Remote PAUSE
or R.A.EDIT
To PAUSE IN
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
USING THE REMOTE CONTROL UNIT
Connector cover**
To S
To AV
S-Video
cable
(optional)
Red to
AUDIO
R IN
To
S-VIDEO
IN
VCR
TV
DISPLAY

MAKE CONNECTIONS

Also refer to pg. 22 and 23.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to "VIDEO", then set the Power
Switch to " " while pressing down the Lock
Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 50).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
remote control (provided).
In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one or
more core filter. If a cable has only one core filter, the end
that is closest to the filter should be connected to the
camcorder.
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the sheet
included in the package for details on its availability.
Make sure to connect the end with a core filter to the
camcorder. The core filter reduces interference.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
pg. 50).
pg. 50). Or, press DISPLAY on the
(cont.)