For Recording; Night-Alive; Program Ae With Special Effects - JVC GR-DVL512 Instructions Manual

38
EN
NOTES:
During Night-Alive, the following functions
or settings cannot be activated and its
indicator blinks or goes out:
• Some modes of "Program AE With Special
Effects" ( pg. 38, 39), "Picture Wipe/
Dissolve" ( pg. 40. 41).
• "GAIN UP" in the CAMERA Menu
( pg. 47).
• "DIS" in the MANUAL Menu (
• "Video light" when LIGHT OFF/AUTO/ON
is set to "AUTO" (
During Night-Alive, it may be difficult to
bring the camcorder into focus. To prevent
this, use of a tripod is recommended.
MENU/BRIGHT Wheel
Power Switch
NIGHT-ALIVE Button
SHUT T
SPORT
SNOW
SPOT L
TW I L I
SEP I A
MONOT
CLASS
STROB
SL OW
SL OW
pg. 47).
pg. 19).
Lock Button
P.AE Button
Display
ER 1/100
S
G I HT
GHT
ONE
I C F I LM
E
4 X
10 X

Night-Alive

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is strobing
due to the slow shutter speed.
1
Set the Power Switch to "
the Lock Button located on the switch.
2
Press NIGHT-ALIVE so that the Night-Alive indicator
" "appears.
•The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
•"A" appears beside "
being automatically adjusted.
To Deactivate Night-Alive . . .
.... press NIGHT-ALIVE again so that the Night-Alive
indicator disappears.

Program AE With Special Effects

1
Set the Power Switch to "
the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select "
PROGRAM AE", then press it.
4
Rotate the MENU/BRIGHT wheel to select the
desired mode (
complete. Press the MENU/BRIGHT wheel in again.
The Menu Screen closes.
5
Press P.AE so that the selected effect indicator
appears.
To Deactivate The Selected Mode . . .
.... press P.AE again so that the effect indicator disappears.
NOTES:
Program AE with special effects can be changed during
recording or during Record-Standby.
Some modes of Program AE special effects cannot be
used during Night-Alive.
IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Fade/Wipe Effects (
40, 41). If an unusable mode is selected, its indicator
blinks or goes out.

FOR RECORDING

" while pressing down
" while the shutter speed is
" while pressing down
pg. 39), then press it. Selection is
pg.