Advertisement
Service Information
assembly being damaged.
U.S.A. Dealer Training Information
To access the training TECHAssist on this topic, take the following path at the GM Training Website:
1. After logging into the gmtraining.com website, choose the link on the left side of the page titled
"Service Know-How/TECHAssist."
2. Then choose "TECHAssist."
3. Next, scroll down to the category of Emerging Issues.
4. Click the link for course "50250.20T1 Repair Procedure - Power Side Door on GMT 201
Crossover Vans."
5. This will take you to the Catalog page. Choose the "Take or Continue Course" link on the left.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
C1180
B5000
B5001
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to
inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist
in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and
know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your
vehicle may benefit from the information.
© Copyright General Motors Corporation. All Rights Reserved.
%DFN
)RUZDUG !
http://service.gm.com/servlets/BlobShtml?ShtmlFile=1933131&pubid=1632&evc=sm
Description
Weatherstrip, Sliding Door - Align or Replace
Door Assembly, Sliding-Right - Align
Door Assembly, Sliding-Left - Align
Document ID# 1933131
2007 Chevrolet Uplander Ext.
Page 13 of 13
Labor Time
0.3 hr
0.1-0.3 hr
0.1-0.3 hr
WE SUPPORT
VOLUNTARY
TECHNICIAN
CERTIFICATION
)HHGEDFN
3ULQW
4/9/2007
Advertisement
