JVC GR-DVL150 Instructions Manual page 27

* There is the sound effect of a shutter closing.
To Delete Unwanted Still Images . . .
PIN-UP
.... when unwanted still images are stored in the memory
Pin-Up mode*
To Remove The Shutter Sound . . .
.... when you do not want to hear the shutter sound, set
NOTES:
FRAME
Snapshot mode
with frame*
FULL
Snapshot mode
with no frame*
MULTI-4
Multi-Analyser 4
MULTI-9
Multi-Analyser 9
card or its memory is full, refer to "Deleting Images"
( pg. 32) and delete unwanted still images.
"BEEP" to "OFF" in the Menu Screen (
The sound is no longer heard from the speaker.
Even if "MULTI-4" or "MULTI-9" is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom or Night-Scope (
Even if "DIS" is set to "ON" (
will be disabled.
If Snapshot recording is not possible, "PHOTO" blinks
when SNAPSHOT is pressed.
If Programme AE with special effects (
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
If shooting is not performed for approx. 5 minutes when
the Power Switch is set to " " or "
supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
set the Power Switch to "OFF", then to " " or "
The Motor Drive mode (
VIDEO/DSC Switch is set to "
Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any compatibil-
ity with devices which are not compliant to DCF.
27
EN
pg. 46, 48).
pg. 38).
pg. 47), the Stabiliser
pg. 38) is
" and power is
".
pg. 42) is disabled when the
".