Using The Optiional Remote Control Unit; Installing The Battery - JVC GR-DVL145 Instructions Manual

40
EN
A
2
B
2
1
Remote sensor
USING THE OPTIONAL REMOTE CONTROL UNIT
1 1
3
1
Lock hole
3
1
Knob
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.

Installing The Battery

(RM-V700U, optional)
The remote control uses one lithium battery
(CR2025).
1
There are 2 ways to pull the battery holder out of
the RM-V700U.
: Pull out the battery holder while sliding the lock
hole.
: Pinch the release tab and pull out the battery
holder.
2
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
• Read the caution concerning lithium batteries in the
RM-V700U instruction manual.
When using the remote control, be sure to point it
at the remote sensor. The transmitted beam's
approximate effective distance for indoor use is
5m.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.