Table of Contents
Advertisement
Controls
Mounts for the lower LATCH anchors are lo‐
cated in the gap between the seat and backrest.
Mounting LATCH child restraint fixing
systems
1.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
2.
Ensure that both LATCH anchors are prop‐
erly connected.
Child restraint fixing system with a
tether strap
LATCH mounting eyes
Only use the mounting eyes for the upper
LATCH retaining strap to secure child restraint
fixing systems; otherwise, the mounting eyes
could be damaged.◀
Mounting points
There are two mounting points for child restraint
fixing systems with a tether strap.
56
Transporting children safely
Online Edition for Part no. 01 40 2 607 971 - 09 11 490
Retaining strap guide
Retaining strap
Make sure the upper retaining strap does
not run over sharp edges and is not twisted as it
passes to the top anchor. Otherwise, the strap
will not properly secure the child restraint fixing
system in the event of an accident.◀
1
Direction of travel
2
Upper retaining strap
3
Head restraint.
4
Rear window shelf
5
Mounting point/eye
6
Hook for upper retaining strap
Attaching the upper retaining strap to
the mounting point
1.
Fold the attachment point up.
2.
Guide the upper retaining strap over the
head restraint.
3.
Attach the hook of the retaining strap to the
mounting eye.
4.
Tighten the retaining strap by pulling it
down.
Advertisement
Table of Contents
