Table of Contents
Advertisement
Controls
Initializing after a power failure
After a power failure during the opening or clos‐
ing process, the roof can only be operated to a
limited extent.
Initializing the system
The system can be initialized when the vehicle
is stationary and the engine is running.
During the initialization, the roof closes without
pinch protection.
Danger of pinching
Monitor the closing process and make
sure that the closing path of the glass sunroof is
clear; otherwise, injuries may result.◀
Press the switch up and hold it
until the initialization is complete:
▷
Initialization begins within
15 seconds and is completed
when the sunroof and sliding
visor are completely closed.
▷
The roof closes without pinch protection.
44
Opening and closing
Online Edition for Part no. 01 40 2 607 971 - 09 11 490
Advertisement
Table of Contents
