Install The Battery; Replace The Back Cover - Samsung Rugby 4 User Manual

Ruggedized mobile phone
Hide thumbs Also See for Rugby 4:
Table of Contents

Advertisement

Install an Optional Memory Card
You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
To add additional memory to your phone, you can
insert a microSD card into the memory card slot,
located on top of the SIM card, inside the back of
the phone.
Use the following instructions and illustrations to
properly install a microSD card.
Note: Your phone supports microSD cards to a
maximum size of 32GB.
1. Remove the back cover and the battery.
2. Slide the microSD card into the slot as shown in
the diagram.
Warning! Please note the printed circuit side faces
down when inserting the card.
To remove a microSD card:
► Press down and gently slide it out of the socket.
Getting Started

Install the Battery

1. Insert the battery into the opening on the back of
the phone, making sure the connectors align.
2. Gently press down to secure the battery.

Replace the Back Cover

1. Place the cover back on the bottom of the
handset (1) then press down firmly (2).
2. Press down along the edges to make sure the
cover is flush with the phone and that there is a
tight seal.
3. Turn the slot on the back cover lock clockwise
until the cover locks.
Note: When placing the cover back on the phone,
press down firmly along the edges to ensure that the
cover is flush with the phone. This ensures that the
battery compartment is pressurized.
6
Assemble Your Device

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents