Sony D6603 User Manual page 45

To use a noise cancelling headset
1
Connect the noise cancelling headset to your device.
2
From your Home screen, tap
cancelling, then drag the slider beside Noise cancelling to the right.
3 If you want Noise cancelling to be enabled only during music or video playback
or when the screen is active, mark the Power saver mode checkbox.
4
If you want Noise cancelling to be enabled for as long as the headset is
connected, unmark the Power saver mode checkbox.
A noise cancelling headset may not be included with your device at purchase.
When a noise cancelling headset is connected to your device for the first time, you can also
select the noise cancelling headset type by dragging down the status bar to open the
Notification panel and then tapping Headphones connected.
To adjust the settings to the noise environment
1
Make sure a noise cancelling headset is connected to your device.
2
From your Home screen, tap
3
Find and tap Settings > Sound > Audio settings > Noise cancelling > Noise
environment.
4 Select the relevant noise environment type, then tap OK.
This is an Internet version of this publication. © Print only for private use.
> Settings > Sound > Audio settings > Noise
.
45