Configuring Tcp/Ip - Zte ZXV10 W300 Maintenance Manual

1.
In the browser, select Tools > Internet Options.
2.
Click the Connections tab and then click the LAN Settings button.
3.
Uncheck the Use a proxy server for your LAN box if it is checked.
4.
Click the OK button.

Configuring TCP/IP

If the operating system of the computer is one of the following ones: Window
s95, Windows98, WindowsME, Windows2000, and WindowsXP, there are two
ways for configuring the computer (the first one is recommended). The follo
wing instruction uses WindowsXP as an example (the method under another
operation system is similar).
To obtain an address from the W300 via DHCP, perform the following

procedure in the computer:
1.
In Windows taskbar, select Start > Control Panel.
2.
Double-click the Network Connection icon.
3.
Right click Local Area Connection,and select Properties.
4.
Select Internet Protocol (TCP/IP), and then click the Properties butt
on.
5.
In the Internet Protocol (TCP/IP) Properties dialog box, check Obtai
n an IP address automatically and check Obtain DNS server addre
ss automatically.
6.
Click OK to confirm and save the settings.
To configure a static address, perform the following procedure in the

computer:
1.
In Windows taskbar, select Start > Control Panel.
2.
Double-click the Network Connection icon.
3.
Right click Local Area Connection,and select Properties.
4.
Select Internet Protocol (TCP/IP), and then click the Properties butt
on.
5.
In Internet Protocol (TCP/IP) Properties dialog box, check Use the f
ollowing IP address to specify this computer's IP address. This IP addr
Proprietary Information of ZTE CORPORATION
Chapter 2 - Product Installation
11