Table of Contents
Advertisement
Playback Sound
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany
your playback picture. According to the menu access
explanation on pg. 24, select "SOUND MODE" or
"12BIT MODE" from the Menu Screen and set it to the
desired parameter.
SOUND MODE
[STEREO
]: Sound is output on both "L" and "R"
channels in stereo.
SOUND L
: Sound from the "L" channel is output.
SOUND R
: Sound from the "R" channel is output.
12BIT MODE
MIX: Original and dubbed sounds are combined and
output in stereo on both "L" and "R" channels.
[SOUND 1]: Original sound is output on both "L" and
"R" channels in stereo.
SOUND 2: Dubbed sound is output on both "L" and
"R" channels in stereo.
NOTES:
• The camcorder cannot detect the sound mode in which
the recording was made during fast-forward or rewind.
During playback the sound mode is displayed in the upper
left corner.
• The "SOUND MODE" setting is available for both 12-bit
and 16-bit sound. (In previous models' functions, "12-bit" is
called "32 kHz" and "16-bit" is called "48 kHz".)
[ ] = Factory-preset
Display
12
b i t / SOU
ND1
L
D
E
C
2
5
5
3 :
0
12 : 34 : 24
USING MENUS FOR DETAILED ADJUSTMENT
4
6
ON SCREEN setting:
For playback sound,
tape speed and tape
running.
DATE/TIME setting:
For date/time.
0 '
3
P
M
TIME CODE setting:
For time code.
Minutes
Seconds
Frames*
* 30 frames = 1 second
EN
25
Hide quick links:
Advertisement
Table of Contents
