Panasonic SJ-MJ75 Service Manual page 33

5. When the adjustment mode is activated, "TE" will be displayed. After "TE" is
displayed, select the desired adjustment item with the
button.
*In the display of T1 ~ TE shown above, you must adjust T1 and T2.
6.1.4. Playback-only disc automatic adjustment
With the T1 displayed, set the test disc and press the PLAY key to active the
adjustment mode.
During the adjustment, "OADJ" will be displayed. If there are no abnormalities,
"OOK" will be displayed. (Note1)
If the key is pressed while the "OOK" or "ONG" is being displayed, the
setting returns to the T1 display.
When finished, remove the disc.
Adjustment mode
Adjustment mode
Playback-only disc automatic
adjustment
Magneto-optical disc automatic
adjustment
Playback-only disc automatic
adjustment value check
Magneto-optical disc automatic
adjustment value check
Laser power check
EFM jitter measurement
ADIP jitter measurement
Error rate measurement
Tilt measurement
PWB inspection (audio test)
EEPROM check
Display
T1
T2
T3
T4
T5
T6
T7
T8
T9
TA
TE
33
button or