Table Of Contents; Transit Damage; Data Plate - Dometic RM 4601 Manual

OPERATING AND INSTALLATION INSTRUCTIONS
FOR DOMETIC REFRIGERATORS
INTRODUCTION
We are pleased that you have chosen this refrigerator
and hope you will derive much satisfaction from using it,
but first a few well-meant words of advice:
It is important to read through these instructions care-
fully before using the refrigerator.
To ensure good refrigeration and economical operation,
the refrigerator must be installed and used as described
in these instructions.
The refrigerator is designed for installation in caravans
or campers.

TRANSIT DAMAGE

Inspect the refrigerator for damage. Transit damage must
be reported to whoever is responsible for delivery not
later than seven days after the refrigerator was deliv-
ered.

DATA PLATE

Check the data plate, inside the refrigerator, to ensure
that you have received the right model.
The right gas pressure is ........................... 2.7 kPa
The right voltage is .......................... 230 - 240 volts
The data plate contains e. g. the following details:
Model designation
Product number
Serial number
Voltage
Gas pressure
Since these details will be needed if you have to contact
service personnel, it is a good idea to make a note of
them here.
RM 4601
..................................
..................................
.................................. volts
.................................. kPa
CONTENTS
OPERATING INSTRUCTIONS ............................ 4
CONTROLS .................................................... 4
STARTING THE REFRIGERATOR ................. 4
REGULATING THE TEMPERATURE ............. 4
TRAVEL CATCH ............................................. 4
FOOD STORAGE ........................................... 4
ICE-MAKING ................................................... 5
DEFROSTING ................................................. 5
CLEANING THE REFRIGERATOR ................ 5
TURNING OFF THE REFRIGERATOR .......... 5
IF THE REFRIGERATOR FAILS
TO WORK ....................................................... 5
MAINTENANCE .............................................. 6
SERVICE ......................................................... 6
INSTALLATION INSTRUCTION ......................... 6
REPOSITIONING THE HINGES ..................... 6
DOOR PANEL ................................................. 6
INSTALLATION/BUILDING-IN ....................... 6
VENTILATION OF THE UNIT ......................... 8
LP GAS CONNECTION .................................. 8
ELECTRICAL CONNECTION ........................ 9
TECHNICAL DATA ......................................... 9
POSITIONING OF SHELVES ......................... 20
3