Setting The Clock And Delay Brew Time - Sunbeam BVSBSJX36 Series User Manual

3. When brewing is complete, turn your coffeemaker
off, discard the water in the decanter and rinse
the decanter, decanter lid, and filter basket. Your
coffeemaker is now ready to use. Enjoy it!

SETTING THE CLOCK AND DELAY BREW TIME

To Set the Clock:
1. Plug the power cord into a standard
electrical outlet. The clock will flash on
the control panel to indicate that the
time has not been set yet.
2. Press and hold the HOUR and MINUTE
buttons until you reach the current time.
The AM or PM indicator will light at the
top of the display (Figures 1 and 2). The
clock is now set!
NOTE: Pressing any button before setting the
clock will cause the clock to start keeping time
from 12:00 a.m. You must set the clock if you
want to use the Delay Brew feature.
To Set the Delay Brew Time:
While the display is in the clock mode,
simply press the SET DELAY button (Figure 3)
and, while the DELAY BREW time is flashing,
set the brew time by pressing the HOUR
and MINUTE buttons. The AM or PM
indicator will light at the top of the clock
display. (Figure 4) Within a few seconds the
display will change to the current time. The
Delay Brew Time is now set!
Figure 1
Figure 2
Figure 3
11