Playing Back More Than 16 Channels - Yamaha Disklavier Operation Manual

5
Press [>] until the c cursor is next
to the Delay In parameter, then
use the [–/NO] and [+/YES]
buttons to set it.
Option Description
ON A delay of 500 ms is applied to all
incoming MIDI data from the
computer so that the timing of the
piano and the internal XG tone
generator match for smooth
playback.
OFF The delay is not applied, and the
piano is played in "real time".
However, playback will not be
smooth. When Piano Rcv Ch is
set to ##, all channels are played
by the internal XG tone generator,
so Delay In is automatically set to
OFF.
☛ For more information on the 500 ms delay
function, see "Controlling the Disklavier in
Real Time" on page 68.
6
Press [FUNC.] or [STOP] to return
to the normal display.
74
Playing Back More than
16 Channels
You can play back from a computer song data that
contains up to 32 channels by connecting the
Disklavier's TO HOST connector to the serial port
on a computer and its MIDI OUT connector to a
MIDI instrument. The 32 channels are sent to the
Disklavier using software corresponding to port
signals. The Disklavier plays channels 1 to 16
(port 1), and channels 17 to 32 (port 2) are output
to an external MIDI instrument.
1
Press [FUNC.].
2
Press [>] until the c cursor is next
to the MIDI Setup option, then
press [ENTER].
The following display appears.
3
Press [>] until the c cursor is next
to the MIDI Out option, then
press [ENTER].
The following display appears.
4
With the c cursor next to the MIDI
Out parameter, use the [–/NO]
and [+/YES] buttons to select
"Thru Port2".
5
Press [FUNC.] or [STOP] to return
to the normal display.