Table of Contents
Advertisement
PROGRAM AE select dial
LCD monitor or viewfinder
GAIN UP
Menu Screen
TELE MACRO
INTERVAL TIMER
REC TIME
JLIP ID NO.
SET CHARACTER
DATE/TIME
END :MENU KEY
Set Time and
Date Screen
1. 1. 00
SET
CANCEL
Date
Day/Month/Year
NEAR
MENU FAR
S.LX
OFF
OFF
OFF
07
1 0: 4 5
Time
24-hour indication
Date/Time Setting
SELECT MODE
1
First set the power switch to "CAMERA". Turn the
PROGRAM AE select dial to any position except
AUTO LOCK.
ACCESS MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press – to move the highlight bar down to "DATE/
TIME", then press NEAR. The Set Date And Time
screen appears.
SET DATE/TIME
4
Press FAR or NEAR until the item you want to set
begins blinking, then press + or – to until the correct
setting appears.
•If you decide you want to return the date and time
to the previous settings, press FAR or NEAR to
move the highlight bar to "CANCEL", then press
MENU.
•If you're satisfied with the settings, go on to step 5.
START CLOCK OPERATION
5
Once you've set the date and time, press FAR or
NEAR until "SET" begins to blink, then press MENU.
The Menu screen reappears.
CLOSE MENU
6
Press MENU.
NOTES:
To display the date and time in the LCD monitor or the
viewfinder and on a connected TV, see "Date/Time
Character Insert" (
If, in step 4, you input an invalid date (30. 2, 31. 6,
etc.) and perform step 5, "INPUT ERROR" appears
blinking at the bottom of the screen. Press +, –, FAR or
NEAR to input the correct number.
pg. 22).
7
EN
Advertisement
Table of Contents
