Table of Contents
Advertisement
14
EN
Zoom-in
RETAKE (R/F)
Zoom-out
Zoom indicator
Power zoom lever
RECORDING
FEATURE:
Zooming
PURPOSE:
Varies the focal length of the lens
and produces the zoom in/out effect.
OPERATION:
Zoom In
1) Push the power zoom lever down
toward "T".
Zoom Out
1) Push the lever up toward "W".
The further the power zoom lever
NOTES:
is pushed, the faster the zoom
speed becomes.
Focusing may become unstable
during zooming. In this case, set
the zoom while in Record-Standby,
set manual focus or Focus Lock
(
out in Record mode.
FEATURE:
Quick Review
PURPOSE:
To check the end of the last record-
ing.
OPERATION:
1) Press "
during the Record-Standby mode.
•Tape is rewound for about 2
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the
Record-Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording.
Pressing "F" fast-forwards the tape
and pressing "R" reverses it.
3) Press Recording Start/Stop button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
Basic Features
pgs. 18, 19), then zoom in or
" and release quickly
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
Advertisement
Table of Contents
