Getting Started; Power - JVC GR-AXM25 Instructions Manual

8
EN
CHG. (charge) indicator

POWER

indicator
END
indicator
REFRESH switch
BATT. RELEASE
ATTENTION:
Before detaching the power source,
make sure that the camcorder's power
is turned off. Failure to do so can result
in a camcorder malfunction.
**REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge the
battery pack before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as
shown in the above illustration. Then push
REFRESH. The REFRESH indicator lights
when discharging starts, and goes out
when discharging is complete.
Marks
To AC outlet
REFRESH indicator
Hook on.
1 1
2
Push in.

GETTING STARTED

Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction of
the arrow.
BATT. PACK
BN-V11U approx. 1 hr. 10 min.
BN-V12U approx. 1 hr. 10 min.
BN-V22U approx. 2 hrs. 10 min.
BN-V25U approx. 2 hrs. 40 min.
USING THE BATTERY PACK
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
2
Slide BATT. RELEASE and pull out the battery pack.
Approximate recording time (unit: min.)
BATT. LCD monitor on/
PACK Viewfinder off
BN-V11U 50
BN-V12U 50
BN-V22U 105
BN-V25U 145
CHARGE DISCHARGE
approx.
3 hrs. 30 min.
approx.
3 hrs. 30 min.
approx. 7 hrs.
approx. 10 hrs.
LCD monitor off/
Viewfinder on
55
55
115
155