Table of Contents
Advertisement
18
EN
EFFECT
Button
Recording Start/Stop Button
NOTES:
Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade
in/out or wipe in/out.
The screen becomes slightly reddish when the Fade/Wipe is used with Sepia (
FADER
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a
mosaic pattern.
SHUTTER (Wipe)
A black screen moves in from the top and
bottom, closing over the image like a shutter, or
a new image pushes open the black screen
vertically from the center.
SLIDE (Wipe)
A black screen moves in from the left to
gradually cover the image, or a new image
moves in from right to left.
Power Switch
RECORDING
Fade/Wipe Effects
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.
1
Set the Power Switch to "PRO.".
2
Press EFFECT repeatedly until the desired mode's
name and indication appear.
They are displayed for approx. 2 seconds, then the
name disappears so that only the indication remains.
The effect is reserved.
3
Press the Recording Start/Stop Button to activate fade-
in/out or wipe-in/out.
4
To cancel a fade or wipe, press EFFECT repeatedly
until "OFF" appears.
"OFF" is displayed for approx. 2 seconds and the
fade/wipe standby mode is canceled.
DOOR (Wipe)
Wipes in as the two halves of a black screen open to the
left and right, revealing the scene, or wipes out and the
black screen reappears from left and right to cover the
scene.
CW:CORNER (Wipe)
Wipes in on a black screen from the upper right to the
lower left corner, or wipes out from lower left to upper
right, leaving a black screen.
WW:WINDOW (Wipe)
The next scene gradually wipes in from the center of the
screen toward the corners, covering the previous scene.
Advanced Features
3
pg. 19).
Advertisement
Table of Contents
