Table of Contents
Advertisement
CHAPTER 5: CONFIGURING THE SOFTWARE
Download HSP over a network connection
Stage HSP File for SGConfig
D20MX INSTRUCTION MANUAL
6.
If the D20MX is configured for device redundancy, you may switch over the D20MX
and repeat the previous two steps for the other unit.
To download an HSP file to the D20MX over a network connection:
1.
Stage HSP file for SGConfig. See section "Stage HSP File for SGConfig" on page 71.
2.
Transfer HSP file over a network connection. See section "Transfer HSP over a network
connection" on page 74
3.
Apply HSP. See section "Apply HSP" on page 75.
4.
If the D20MX is configured for device redundancy, you may switch over the D20MX
and repeat the previous 2 steps for the other unit.
1.
Press the Windows Key
Result: The Windows Explorer window appears.
2.
Navigate to a folder to which you have write permissions.
Result: The content of the folder is displayed.
3.
Click the New folder button in Windows Explorer
Result: A new folder is created with the name "New folder" and the cursor is positioned
to allow renaming of the folder.
4.
Rename the folder (e.g., D20MX). This folder is called the staging folder in the
remaining steps of this procedure.
Result: The folder is renamed.
5.
Do either of the following:
–
Insert the D20MX Documentation CD into the computer's DVD/CD drive, or
–
Extract then CD zip file on to the root of your C: drive and double click the
readme.html file under the ISO-Image sub-folder, which is nested two levels
deep into the extracted folder.
Result: The Documentation CD home page appears in your default Web Browser.
Alternate result for "Insert the D20MX Documentation CD": The home page does
not appear in your default Web Browser. In this case, navigate to the CD in
Windows Explorer, and double-click the readme.html file on the root of the CD.
6.
Click on the link named D20MX Firmware Files.
Result: The Firmware Files folder is displayed. It contains folders named HSP,
SAN0001.14X and SAN0002.14X.
7.
Using Windows Explorer, navigate to the SAN0001.14X sub-folder under the Firmware
Files folder and copy/paste the files as shown in the following table.
To copy a file, select it and press Ctrl-C. To paste a file, click on the Windows Explorer
window showing the staging folder created in step 4 and press Ctrl-V.
Navigate to folder on D20MX Documentation CD
or Folder extracted from Zip File
Firmware Files\SAN0001.14X
Result: The Windows Explorer window showing the staging folder is displaying the files
shown in the above table.
and E at the same time
Copy/Paste the following files to the
staging folder created in
appl.out
VxWorks
GE INFORMATION
step 4
71
Advertisement
Table of Contents
