Whirlpool Cabrio Use & Care Manual page 11

10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off, if
desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
11.
Touch and hold START/PAUSE
button to begin wash cycle
Touch and hold START/PAUSE button for 3 seconds to
start the wash cycle. When the cycle has finished, the end
of cycle signal will sound (if set). Promptly remove items
when cycle is done to avoid odor, reduce wrinkling, and
rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will
unlock once the washer movement has stopped. This may
take several minutes if the load was spinning at a high
speed. Then close lid and touch and hold START/PAUSE
button again for 3 seconds to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes
the water will pump out and F8E6 error code will appear
on the display.
11