Date/Time Setting - JVC GR-AXM10 Instructions Manual

PROGRAM AE select dial
LCD monitor or viewfinder
GAIN UP
TELE MACRO
Menu Screen
INTERVAL TIMER
REC TIME
JLIP ID NO.
SET CHARACTER
DATE/TIME
END :MENU KEY
Set Time and
Date Screen
JA N
SET
CANCEL
Date
Month/Day/Year
Time
12-hour indication with
AM or PM
NEAR
MENU FAR
S.LX
OFF
OFF
OFF
07
1.0 0 AM 1 2 :0 0

Date/Time Setting

SELECT MODE
1
First set the power switch to "CAMERA". Turn the
PROGRAM AE select dial to any position except
AUTO LOCK.
ACCESS MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press – to move the highlight bar down to "DATE/
TIME", then press NEAR. The Set Date And Time
screen appears.
SET DATE/TIME
4
Press FAR or NEAR until the item you want to set
begins blinking, then press + or – to until the correct
setting appears.
•If you decide you want to return the date and time
to the previous settings, press FAR or NEAR to
move the highlight bar to "CANCEL", then press
MENU.
•If you're satisfied with the settings, go on to step 5.
START CLOCK OPERATION
5
Once you've set the date and time, press FAR or
NEAR until "SET" begins to blink, then press MENU.
The Menu screen reappears.
CLOSE MENU
6
Press MENU.
NOTES:
To display the date and time in the LCD monitor or the
viewfinder and on a connected TV, see "Date/Time
Insert" ( pg. 26).
If, in step 4, you input an invalid date (FEB 30, JUN 31,
etc.) and perform step 5, "INPUT ERROR" appears
blinking at the bottom of the screen. Press +, –, FAR or
NEAR to input the correct number.
11
EN