Standby Mode - JVC GR-AX96 Instructions Manual

[Ex. : Black Fader]
FADE IN
FADE OUT
Function indication
After
Fade/Wipe
2 sec.
Mosaic Fader
Black Fader
B B
K K
Mosaic Fader
Shutter Wipe
Slide Wipe
Off OFF
(No indication)
SELECT button
PROGRAM AE select dial
SET button
NOTES:
Pressing and holding the Recording Start/
Stop button allows you to record a black
blank screen, or a mosaic pattern if Mosaic
Fader is selected.
The screen becomes slightly reddish when
the Fade/Wipe is used with Sepia (
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.
1
2
Fade/Wipe
3
4
5
B
K
Fades in/out to a black screen.
Gradually turns/returns the picture into/from a mosaic
pattern.
A black screen moves in from the top and bottom,
closing over the image like a shutter, or a new image
pushes open the black screen vertically from the center.
pg. 19).
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
SELECT MODE
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT FUNCTION
Press SELECT repeatedly until "
appears.
ENGAGE FADE- OR WIPE-

STANDBY MODE

Press SET to cycle through the modes as shown at
left. Once the desired mode appears, it is selected
and reserved.
•The selected mode's name and its indication are
displayed in the viewfinder for approx. 2 seconds.
Then the name disappears, and only the indication
remains.
START RECORDING
Press Recording Start/Stop to start recording and
activate fade- or wipe-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade- or wipe-out.
TO CANCEL FADE- OR WIPE-
STANDBY MODE
While " " is displayed, press SET twice.
Fade/Wipe
•"OFF" is displayed for approx. 2 seconds and the
reserved fade or wipe is cancelled.
Black Fader
Mosaic Fader
Shutter Wipe
Slide Wipe
23
"
Fade/Wipe