D-Link DCS-942L User Manual page 30

Section 3 - Configuration
Video Clip Notifications is a feature to send recorded video via FTP or e-mail when a trigger
is activated. This step will only set up notifications to be sent with video clips.
Enable: Check this box to enable the Video Clip Notification function.
Only During:
Check this box to setup a scheduled timeframe when notifications should be
sent. This is useful if you do not want to be notified when it would otherwise be
inconvenient, such as during the night or on weekends.
Video Clip Type:
The Video Clip Wizard uses Profile 2 by default. More information about video
profiles can be found in "Audio and Video" on page 37. You can set the file type
from the drop down menu. You can also specify how many seconds before the
event that triggered recording should be sent, as well as how long the maximum
duration of the video clip should be in seconds.
Target: Select where you want the video clip to be sent. It may either be uploaded to
an FTP or sent to an e-mail address. You will need to have all of the necessary
information filled out in order to use either of these features.
Click Next to continue.
D-Link DCS-942L User Manual 30